As a truck driver you are proud of your big rig and you have every right to be. You spend most of your days and nights in it like it is your home. Just like your home, you want your truck to look spectacular with the latest gadgets and for it to outshine all the others. However, you may find it hard to find a time to have a professional clean it up after it has been on the road for a while. It may take days or weeks before someone else could do it, and with your schedule, you may not know the next time you will be home. Therefore, you may want to think about purchasing your own equipment to make your truck look shiny and presentable.

One area of your truck that may need more attention than other areas are the wheels. Your wheels go through a lot out on the road. They encounter rocks, mud, water, snow, ice, etc., all of which can cause them to become dirty with scratches. Zephyr is a well-known company that sells custom polishing products. They have been around for 30 years and are the leading, globally trusted brand name in the Heavy Duty truck market. Zephyr has all the tools you will need to keep your truck’s wheels up to par. Visit them at www.zephyrpro40.com to check out all of the products you will need.

Here is a go-to guide on how to polish your wheels when they need some tender loving care.

Safety First

– The first thing you will want to do is make sure you have all of the protective equipment and gear. You will be using airway buffing wheels which requires the use of safety flanges. These flanges are molded from high-density composite nylon and are lightweight but as strong as aluminum. They must be secured to each side of the buffing wheel and are mandatory when using airway buffing wheels.

– Your personal protective gear needs to consist of ear protection, hand protection, eye protection, and most importantly, respiratory protection.

Supplies Needed

• Variable speed sander/grinder 0-6,000 rpm
• Safety flanges and personal protective gear
• Airway buffing wheels: yellow, green, and white
• Compound/Rouge: tripoli, moss green, and blue moon
• Zephyr Pro 40
• Microfiber towels
• Zephyr Pro 50 Eliminator

 Primary Cutting: 3200rpm

First you will use the 8 yellow mill treated buffing wheel and tripoli compound. To begin, you will need to break in the buffing wheel by raking it and fraying the edges. This also allows it to more easily take the compound. Don’t forget, the buffer spins counter clockwise so be careful when applying the compound. Next, hold the bar of rouge on the buffing wheel working it from one edge to the other for about 3 seconds. Now, break your wheel down into sections. Begin with the face of the wheel and work your way out to the edge. Go left to right, bottom to top, with nice even passes. Don’t apply too much pressure. Instead, let the grinder spin freely and take your time, making sure you make even passes and overlapping each previous pass. Move up slowly and push your black line of compound gradually forward. Once the black line starts to fade, you will need to take all of the old burnt-on compound off of the pad and reapply more, then repeat. This is the most important step in the polishing process. If done right, you will have laid the groundwork for a striking mirror finish and the rest is easy.

Secondary Cutting: 3200rpm

You should now have a shiny surface with a light haze and what looks like hash marks. Don’t worry, this is normal. Now it is time to get the green buffing wheel and green moss compound. Rake your wheel just like before and apply compound to the wheel. Once again, start from the inside and work your way to the edge. The green moss rouge will give your wheels that high luster, show quality shine. In between steps, take a microfiber towel and apply some Pro 50 Eliminator on to the wheels. This will take away any leftover compound from around the holes. Leave the Pro 50 Eliminator on after the secondary stage. This will let you see exactly where your polishing line is as well as cleaning all of the green rouge off before moving on to the final step.

Final Finish: 1600-1800rpm

Finally, grab the white buffing wheel and the blue moon compound. Just like before, start from the inside and work your way out to the edges. This will break down any buffing lines left and blend it all together. If you do all three steps just like this, then the result should be a metal, flawless mirror.

Sealing in the Shine

Now it’s time to highlight that super shine you just created by sealing and protecting it. Using a microfiber towel and the Zephyr Pro 40, fold the towel into quarters and apply about a half-dollar size amount on it. Wipe down the wheel by going with the grain, applying it nice and evenly over the entire wheel. Let it dry and use a fresh microfiber towel to remove it. This repels water and road grime that your wheels may catch out on the road. Use the Pro 40 metal polish for maintenance thereafter.

It may not always be easy for you to find time to polish your own wheels or other parts of your truck, so running through a truck wash may be a good idea to hold you over until you can find time. Direct Freight Services provides helpful trucking links, including truck washes, that you can checkout under the more services tab.

Making your truck look good sometimes means you will have to add on aftermarket parts. A lot of trucks do not come with all of the nice chrome accessories or high-quality parts. Replacing existing parts and customizing your truck can make it look and operate better. Choosing the best accessories for your truck should be something you take into serious consideration. You want the best so you do not have to continuously replace them. You want high-quality products from a manufacturer that you can trust and come back to time and time again. One of those accessories that you should spend time researching in order to pick the right one for your needs is a top stack. According to sales and reviews, there are two companies that consumers believe carry the best truck exhaust stacks and who are known for their high-quality products-Dynaflex and Lincoln Chrome. Before doing any type of research or shopping, you need to measure your exhaust so you can properly fit the top stacks. Then it will be time to choose your stack.

Measuring Your Exhaust

You will need to measure the internal and external diameter of your exhaust. The internal diameter is the inside of the pipe, which gives you the measurement for the other pipe you would fit into it. The external diameter gives you the measurement for another pipe that you would fit around it and measures the pipe itself. Here is a simple how-to guide.

• Internal: measure the pipe opening from edge to edge, not including the pipe, just the hole.
• External: measure the pipe opening from edge to edge, including the pipe.

Choosing Top Stacks

Choosing a top stack may be more overwhelming and difficult than you think. There are so many options and variances between each one. Make sure you think about the overall look you are wanting along with the current look of your truck. For instance, if you are gradually adding new parts, then you will want some unity between old and new so your truck still looks good throughout the process.

Company #1: Dynaflex

Dynaflex manufactures products that are made in the USA. They are also known for being the manufacturers of the Original Monster Stacks and have been in business since 1972. Their focus is to produce exhaust systems for heavy duty vehicles. Dynaflex is known for having a deluxe, unique line up of products featuring nine styles and being of very high-quality. Customers believe that Dynaflex produces consistent products, is top in innovation, and agree that by using a Dynaflex part, you will grab attention and turn heads. The only downside to Dynaflex is that their products are some of the most expensive on the market. However, sometimes you get what you pay for, and if lasting, high-quality products are what you want, then Dynaflex may be the brand for you.

Company #2: Lincoln Chrome

Lincoln Chrome is known for their high-quality chrome exhaust systems and accessories. They have been in business since 1952 and consider chrome to be their specialty. Lincoln Chrome also focuses on the heavy duty truck market and makes seven different styles of part. They are known as a premium product brand who makes high quality products and produces long-lasting durable products that look good. All of their products are made in Nebraska and are slightly less expensive than Dynaflex, many are a plus for many consumers.

Choosing the right top stack for your truck may be overwhelming but it should also be a fun time for you. Afterall, your truck is like your home, spending many hours driving in it, so you want it to reflect who you are. You really can’t go wrong with either brand. It’s all about finding the right part that suits your needs and your truck. Once you have your truck the way you want it and are ready to get out on the road, contact Direct Freight Services so we can help you find the next load to haul.